Difference between revisions of "IntegrationDaq 210129"

From Moller Wiki
Jump to: navigation, search
(Agenda)
(Agenda)
Line 18: Line 18:
 
*  Follow-up from the Jan 15 discussion of running the integrator data from the FPGA instead of through a ROC on the SoC
 
*  Follow-up from the Jan 15 discussion of running the integrator data from the FPGA instead of through a ROC on the SoC
 
**  Reminder:  Production data rate from each integrating ADC module is ~4MB/s.  The diagnostic mode full data rate is ~34MB/s/channel giving ~544MB/s (~4.3Gb/s) for all channels in the module.
 
**  Reminder:  Production data rate from each integrating ADC module is ~4MB/s.  The diagnostic mode full data rate is ~34MB/s/channel giving ~544MB/s (~4.3Gb/s) for all channels in the module.
 +
**  Reminder:  The SOM is the [https://www.enclustra.com/en/products/system-on-chip-modules/mercury-xu8/ Mercury+ XU8], and the evaluation board that is currently used for testing is the [https://www.enclustra.com/en/products/base-boards/mercury-pe1-200-300-400/ Mercury+ PE1]
 
*  General discussion
 
*  General discussion
  
 
== Minutes ==
 
== Minutes ==
 
Participants:
 
Participants:

Revision as of 22:48, 28 January 2021

Back to Main Page >> Data Acquisition Meetings >> Integrating mode DAQ meetings

previous meeting << >> following meeting

Meeting information

 Meeting time:  3:30pm Eastern
 
 BlueJeans calling instructions:
 Toll-Free Number (U.S.&  Canada):  888-240-2560
 Other BlueJeans access phone numbers are listed at https://www.bluejeans.com/premium-numbers
 
 Bluejeans CODE:                    641 252 323
 Bluejeans link: https://bluejeans.com/641252323

Agenda

  • Activity updates
  • Follow-up from the Jan 15 discussion of running the integrator data from the FPGA instead of through a ROC on the SoC
    • Reminder: Production data rate from each integrating ADC module is ~4MB/s. The diagnostic mode full data rate is ~34MB/s/channel giving ~544MB/s (~4.3Gb/s) for all channels in the module.
    • Reminder: The SOM is the Mercury+ XU8, and the evaluation board that is currently used for testing is the Mercury+ PE1
  • General discussion

Minutes

Participants: