Monday, April 10, 2023 9am ET
From Moller Wiki
previous meeting << >> following meeting
Zoom calling instructions: Zoom link: https://jlab-org.zoomgov.com/j/1610336969?pwd=T0hOMzRUbUVvMGlFTEZkMXBxYlZIZz09
Contents
[hide]Standing Agenda
Urgent Items (Please inform Juliette or Mike about items to be added here)
- positioning the coils while taking into account the varying depth of the epoxy on the belly
- dose on the US torus box o-rings
- Bellows 7
Status Reports not covered by urgent items
- JLAB: DS coil prototype report
- MIT
- UVa
- Manitoba
Business arising from Status Reports
Minutes
Attendance
Urgent Items (Please inform Juliette or Mike about items to be added here)
- positioning the coils while taking into account the varying depth of the epoxy on the belly plates
- epoxy surface exceptionally flat
- depth varies because of conductor waviness (see docDB 1047)
- Dave will work with the manufacturer - confident that we can get average thickness 1.3 mm with a max of 1.6mm
- need to determine the average depth then position the coils so that the average inner layer of conductor starts at the desired radius (each coil may have a different "radius" to the W plate)
- will be positioning using stick micrometers to the surface of the W belly plates, so the W thickness as well as the epoxy will come into play
- Dose on the upstream o-ring
- a W bar on either side near the o-ring seems to be sufficient
- Cip will send dimensions and locations to Jim Kelsey, and Ernie
- Mike will get the interface document updated
- Bellows 7
- leak tight
- Susceptibility good (< 10E-3) everywhere except where they welded a NAMEPLATE !?!
Status Reports not covered by urgent items
Business arising from status reports
- Note: Next Monday is an MIT holiday
Return to Spectrometer Meetings
Return to MOLLER Wiki Main Page