Difference between revisions of "IntegrationDaq 210922"
From Moller Wiki
(Created page with "__NOTOC__ Back to Main Page >> Data Acquisition Meetings >> Integrating mode DAQ meetings In...") |
(→Minutes) |
||
| (7 intermediate revisions by the same user not shown) | |||
| Line 2: | Line 2: | ||
Back to [[Main_Page|Main Page]] >> [[DAQ Meetings|Data Acquisition Meetings]] >> [[DAQ Meetings#Integrating mode DAQ meetings|Integrating mode DAQ meetings]] | Back to [[Main_Page|Main Page]] >> [[DAQ Meetings|Data Acquisition Meetings]] >> [[DAQ Meetings#Integrating mode DAQ meetings|Integrating mode DAQ meetings]] | ||
| − | [[ | + | [[IntegrationDaq_210908 | previous meeting]] << >> [[IntegrationDaq_211103 | following meeting]] |
== Meeting information == | == Meeting information == | ||
| Line 15: | Line 15: | ||
== Agenda == | == Agenda == | ||
| − | * Touching back on | + | * Touching back on prior topics |
| − | ** | + | ** What needs to be done to port CODA ROC to run on the SOM |
** What needs to be done to allow ~20us delays on making the integration start from TI signal? | ** What needs to be done to allow ~20us delays on making the integration start from TI signal? | ||
** Draft timing diagram: [https://moller.jlab.org/cgi-bin/DocDB/private/ShowDocument?docid=790 DocDB 790] | ** Draft timing diagram: [https://moller.jlab.org/cgi-bin/DocDB/private/ShowDocument?docid=790 DocDB 790] | ||
| Line 27: | Line 27: | ||
== Minutes == | == Minutes == | ||
| − | ''Recording on Bluejeans.com:'' | + | ''Recording on Bluejeans.com:'' [https://bluejeans.com/s/XYSnwWd1xVL] |
| − | Participants: | + | Participants: P. King, B. Moffit, M. Goodrich, J. Fast, W. Gu, B. Blaikie, M. Gericke, J. Pan, D. Bishop |
| + | |||
| + | * Next step for CODA ROC: compile ROC for ARM64 & test TI connection | ||
| + | * Allowing ~20us delays on making integration start from TI: William says this will require a TI firmware change, but should be fairly straightforward | ||
| + | * Activity updates | ||
| + | ** Michael: getting ready for the Mainz beam tests. Set-up is 11Oct with the beam time 14-18Oct | ||
| + | *** The 16-channel boards are due to arrive next week | ||
| + | ** Brynne: working on making housings to hold base and preamp together. | ||
| + | * Discussion of my slides for the review | ||
| + | ** HVMAPS may require a more powerful FPGA than the integrators, but it should still work with the TI-FMC | ||
| + | ** Jim recommends to have a slide to define the acronyms used in the talk | ||
Latest revision as of 14:28, 3 November 2021
Back to Main Page >> Data Acquisition Meetings >> Integrating mode DAQ meetings
previous meeting << >> following meeting
Meeting information
Meeting time: 3:00pm Eastern BlueJeans calling instructions: Toll-Free Number (U.S.& Canada): 888-240-2560 Other BlueJeans access phone numbers are listed at https://www.bluejeans.com/premium-numbers Bluejeans CODE: 385 600 867 Bluejeans link: https://bluejeans.com/385600867
Agenda
- Touching back on prior topics
- What needs to be done to port CODA ROC to run on the SOM
- What needs to be done to allow ~20us delays on making the integration start from TI signal?
- Draft timing diagram: DocDB 790
- Activity updates
- General discussion
Open Issues to be followed up later
- Discussions with M. Pitt & J. Musson to understand the beam monitor signals we'll be getting
Minutes
Recording on Bluejeans.com: [1]
Participants: P. King, B. Moffit, M. Goodrich, J. Fast, W. Gu, B. Blaikie, M. Gericke, J. Pan, D. Bishop
- Next step for CODA ROC: compile ROC for ARM64 & test TI connection
- Allowing ~20us delays on making integration start from TI: William says this will require a TI firmware change, but should be fairly straightforward
- Activity updates
- Michael: getting ready for the Mainz beam tests. Set-up is 11Oct with the beam time 14-18Oct
- The 16-channel boards are due to arrive next week
- Brynne: working on making housings to hold base and preamp together.
- Michael: getting ready for the Mainz beam tests. Set-up is 11Oct with the beam time 14-18Oct
- Discussion of my slides for the review
- HVMAPS may require a more powerful FPGA than the integrators, but it should still work with the TI-FMC
- Jim recommends to have a slide to define the acronyms used in the talk
