Difference between revisions of "IntegrationDaq 250320"
From Moller Wiki
(Created page with "__NOTOC__ Back to Main Page >> Data Acquisition Meetings >> Integrating mode DAQ meetings In...") |
(→Minutes) |
||
| Line 17: | Line 17: | ||
Recording at zoomgov: | Recording at zoomgov: | ||
| − | Participants: | + | Participants: R. Michaels, B. Moffit, R. Conaway, P. King, C. Cuevas, P. Souder, A. Sen, J. Pan, Z. Ji, H. Liu, D. Bishop, W. Gu, M. Gericke |
| + | |||
| + | * Michael | ||
| + | ** The remaining 40 production boards have arrived at Manitoba, and the other six that needed the socket repairs are on the way | ||
| + | ** Michael still needs to send the board which has an issue booting from PoE to Daryl | ||
| + | ** Michael has been running the repaired boards nearly constantly over the past few weeks, and is seeing no problems | ||
| + | ** He will plan to do testing with multiple boards to check for cross-talk and noise correlation | ||
| + | ** He will send the rev2 boards to W&M after doing the QA tests; from there we can get them down to JLab | ||
| + | ** He still needs to follow up with Bryerton about what he had to turn off some part of the firmware for the TI | ||
| + | *** Michael's recollection was that Bryerton had said that the TI was sending DMA packets that was interfering with the data DMA, so he had to disable it | ||
| + | * Daryl | ||
| + | ** No update on the firmware development at TRIUMF this week | ||
| + | * Bryan | ||
| + | ** He had been having issues that he wasn't getting the DMA from one of the modules, but he has been able to get it working with the other module. | ||
| + | ** The TI data seems to be missing every other word in DMA transfer; he and William will be looking at it | ||
| + | ** He has not seen any triggered data yet, but it may be that the registers aren't set up properly | ||
| + | ** He has been working on the 0mq process to try to make it more efficient, but is moving away from using 0mq for the CODA readout | ||
| + | ** He now has a CODA readout list to do the streaming mode data, and has a coda file with streaming mode data which he will adapt Michael's streaming mode analysis to work with it. | ||
| + | * Chris | ||
| + | ** He asks if we'd started to use the new FADCs in ESB yet. I think Simona had not yet had a chance to set up the new FADC crate with them. | ||
Latest revision as of 15:52, 20 March 2025
Back to Main Page >> Data Acquisition Meetings >> Integrating mode DAQ meetings
previous meeting << >> following meeting
Meeting information
Meeting time: 11:00am Eastern Location at JLab: CC F226 Zoom connection information is sent out by email; please reach out to Paul if you don't have the current link.
Agenda
- Activity updates
- General discussion
Minutes
Recording at zoomgov:
Participants: R. Michaels, B. Moffit, R. Conaway, P. King, C. Cuevas, P. Souder, A. Sen, J. Pan, Z. Ji, H. Liu, D. Bishop, W. Gu, M. Gericke
- Michael
- The remaining 40 production boards have arrived at Manitoba, and the other six that needed the socket repairs are on the way
- Michael still needs to send the board which has an issue booting from PoE to Daryl
- Michael has been running the repaired boards nearly constantly over the past few weeks, and is seeing no problems
- He will plan to do testing with multiple boards to check for cross-talk and noise correlation
- He will send the rev2 boards to W&M after doing the QA tests; from there we can get them down to JLab
- He still needs to follow up with Bryerton about what he had to turn off some part of the firmware for the TI
- Michael's recollection was that Bryerton had said that the TI was sending DMA packets that was interfering with the data DMA, so he had to disable it
- Daryl
- No update on the firmware development at TRIUMF this week
- Bryan
- He had been having issues that he wasn't getting the DMA from one of the modules, but he has been able to get it working with the other module.
- The TI data seems to be missing every other word in DMA transfer; he and William will be looking at it
- He has not seen any triggered data yet, but it may be that the registers aren't set up properly
- He has been working on the 0mq process to try to make it more efficient, but is moving away from using 0mq for the CODA readout
- He now has a CODA readout list to do the streaming mode data, and has a coda file with streaming mode data which he will adapt Michael's streaming mode analysis to work with it.
- Chris
- He asks if we'd started to use the new FADCs in ESB yet. I think Simona had not yet had a chance to set up the new FADC crate with them.
