View source for Simulation Meeting October spooky 31 2019 1030AM ET

Back to [[Main_Page|Main Page]] >> [[Simulation_Meetings | Simulation Meetings]]

[[Simulation_Meeting_October_19_2019_1030AM_ET | previous meeting]] <<   >> [[Simulation_Meeting_November_7_2019_1030AM_ET | following meeting]]




=Simulation Task List Updated 2019=
* Simulation tasks (new) [[File:MOLLER Tasks List v8 Sim Only.pdf]] [[File:MOLLER_Tasks_List_v8_Sim.doc]]
* Simulation tasks [https://hallaweb.jlab.org/wiki/images/5/58/MOLLER_TasksList_simulation_Dustin.pdf Task List by Dustin]
* Simulation tasks  [https://hallaweb.jlab.org/wiki/images/e/e3/MOLLER_Tasks_List_simulation_Rakitha.pdf Task List by Rakitha]
* Main detector simulation tasks [https://hallaweb.jlab.org/wiki/images/f/fc/MOLLER-Tasks-List-MainDetector_Michael.pdf Task List by Michael]

=Agenda=

* Detector background Update by Sakib
* Get new people up to speed and Progress

== Potential Tasks for Detector Area Simulation ==
# look closely at the  residual source of photons from the upstream collimator regions to see if they  can be further reduced
# replace the outer kryptonite shield with the properly tuned lintels and 3 downstream collars
# review the current status of the beam dump background and its impact on the detector plane region
# construct the geometry of the detector PMT shielding, combine with backgrounds coming from the light guide and quartz tiles, and evaluate the final background levels at the main detector PMTs

== Potential Standard Plots and Numbers for Benchmark==
# Radial plots at detector area from Moller, ep and beam generator
# Rates for Moller, ep, and photons from beam generator (E<10, 10<E<100, E<100)
# 2D scatter plots at detector area from Moller, ep and beam generator
# 2D Raster pattern at the upstream end of the target using Moller, ep and beam generator
# 2D Raster pattern at the entrance to the beam dump using Moller, ep and beam generator

=Attendance=
Attendance: Rakitha, KK, Wouter, Ciprian, Sakib, Micheal, Cameron, Catherine,

=Minutes=
* Default design in Sakib's table first row  for beam pipe includes tungsten beam pipe shielding that we had for past geometry design
* Al-window and beam pipe is the dominant source of bkg.
* Optimizing to reduce the photon background in the ee ring
** Breaking down the electron sources in e-ring coming from the Al windows and then Al beam pipes
* Attach the slides that Sakib showed in the meeting
* Sakib will import his geometry into the develop branch and make sure his magnetic field and develop branch field maps are same. 
** Tag the git version that will be used for the CDR 

<br><br> Return to [[Simulation_Meetings | Simulation Meetings]]
<br> Return to [[Main_Page|Main Page]]