View source for IntegrationDaq 241004

__NOTOC__
Back to [[Main_Page|Main Page]] >>  [[DAQ Meetings|Data Acquisition Meetings]] >>  [[DAQ Meetings#Integrating mode DAQ meetings|Integrating mode DAQ meetings]]

[[IntegrationDaq_240920 | previous meeting]] <<   >> [[IntegrationDaq_241018 | following meeting]]

== Meeting information ==
  '''Meeting time:'''  1:00pm Eastern
  
  Zoom connection information is sent out by email; please reach out to Paul if you don't have the current link.

== Agenda ==
*  Activity updates
*  General discussion

== Minutes ==
Recording at zoomgov:  

Participants:  R. Michaels, B. Waidyawansa, B. Moffit, B. Blaikie, S. Malace, P. Souder, R. Conaway, S. Chatterjee, Z. Ji, M. Gericke, S. Regmi, W. Gu, J. Pan, H. Liu, D. McNulty, D. Armstrong, R. Fair, D. Bishop

*  Michael doesn't have an update on the ADC production.
**  Michael asks what the last firmware update that Bryan and William had gotten form Bryerton:  Bryan thinks is was in June.
***  Bryerton had sent an updated version to Michael in September as a tarball (dated in August) that was specific to the rev.2 board
***  Michael will send the tarball to Bryan.  Bryan will check the commit logs also
*  Bryan had to revert to petalinux for a while, but now has switched back to CentOS and is cleaning up the CentOS environment
**  He is also trying to make it packaged more cleanly to make it wasier to do the updates.
**  Bryan is also debugging the trigger and readout acknowledge responses from the ADC TI that are not getting decoded 
*  Dustin asks what is the plan for the integration DAQ at W&M
**  Brynne says the plan would be using the current streaming mode to do quick testing of the detectors
**  We also want the full 
*  Bryerton has been in contact with Michael, and Michael has plans to work with him on some small fixes 
**  Michael says that Bryerton had implemented the summing routines (for rev 2), but had some questions about the timing of the TI signal.
**  The rev1 integration code is turned off but could be enabled
**  Bryerton will be available in a week, and Michael will talk with him about enabling the summing code for the rev1 boards
**  Michael also says that the fiber Ethernet port should be available in the newest firmware
*  Discussion of the fiber networking
**  The ADC will have a QSFP to SFP+ LC-type connector, and we'd just need a SFP+ network switch. 
**  The fiber internet is still a 1Gbps link.  It could be changed but we'd need the 10Gig firmware module, and someone to include that in our firmware
*  Discussion of the floating grounds on the ADC
**  The ADC ground is referenced to the input ground
**  The copper Ethernet connection are also isolated, although the fiber connections would be more isolated
*  Brynne asks if there is a chassis available to be used at the W&M set-up
**  Michael has one that he will send down
*  Paul will follow up by email with Brynne and Sayak early next week about the configuration of the server and how to add the integrating ADC to the DHCP list