View source for CountingDaq 240719

__NOTOC__
Back to [[Main_Page|Main Page]] >>  [[DAQ Meetings|Data Acquisition Meetings]] >>  [[DAQ Meetings#Counting mode DAQ meetings|Counting mode DAQ meetings]]

[[CountingDaq_240621 | previous meeting]] <<   >> [[CountingDaq_240802 | following meeting]]

== Meeting information ==
  '''Meeting time:'''  1:00pm Eastern
    
   Zoom connection information is sent out by email; please reach out to Paul if you don't have the current link.

== Agenda ==
*  Activity updates
*  Simona:  [https://logbooks.jlab.org/entry/4312817 HALOG 4312817], MOLLER counting DAQ: SPE VTP trigger
*  General discussion

==  Minutes ==
Recording on Zoom:  

Participants:  S. Malace, P. King, B. Moffit, P. Souder, B. Blaikie, R. Michaels, C. Ghosh, Z. Ji, S. Regmi, S. Chatterjee

*  Simona:  Testing with the VTP-based SPE trigger
**  The VTP is looking at the channel 0, which is the LED trigger pulse, to form the trigger, and requires the pulse to be a certain number of samples wide (currently 6) and the threshold
**  The PMT signal can not be passed through a long cable due to timing with the trigger signal in the FADC.  This leads to the PMT pulses being very narrow.
**  She has not done testing with the cosmic trigger yet, has been focused on the SPE data collection
**  Bob asks about the process for making more complicated VTP triggers
**  Kate (from W&M) will be helping with the pion detector cosmic trigger testing once the test stand is moved to the other space in the Test Lab
*  We asks about the analysis
**  Chandan recommends that we standardize on the same bank number for the FADC data in all our test stands.
*  Slow progress on getting the equipment moved to JLab for the W&M test stand set up but it is progressing
*  Simona asks if we could set up an index of the counting DAQ meetings to make it easier to find specific discussions
**  I will set up a starting point and then ask the group for the initial keywords