View source for Simulation Meeting September 21 2021 11AM ET


Back to [[Main_Page|Main Page]] >> [[Simulation_Meetings | Simulation Meetings]]

[[Simulation_Meeting_September_14_2021_11AM_ET | previous meeting]] <<   >> [[Simulation_Meeting_October_5_2021_11AM_ET | following meeting]]

[[Simulations | Simulation page ]]


=Agenda=
# TID doses in the torus region: Ciprian [https://moller.jlab.org/cgi-bin/DocDB/private/ShowDocument?docid=795 slides]
# PS Bunker shielding update: Zhuhal [https://moller.jlab.org/cgi-bin/DocDB/private/ShowDocument?docid=796 slides] 
# Photon Scraper and new Collimator 5 design: Chandan [https://moller.jlab.org/DocDB/0007/000797/001/PhotonScraper_Coll5_SimMeeting.pdf docDB797]
# Shower-max dose estimates - Dustin -[https://moller.jlab.org/DocDB/0007/000794/001/quartzDose_update.pdf docDB794]

=Attendance=

=Minutes=
# TID doses in the torus region: Estimate the total ionization dose in the US torus region. Check TID on rubber that is going to be used on water cooled lead. Then estimate the TID on silicon behind the lintel area for potential locations of magnetic probes. 
# Power supply bunker shielding update by Zhuhal: Two configurations were tested (16 1.4 m thick concrete walls for PS bunker and 18 tweaks for PS bunker walls, shower max and DS beam pipe included). With config-18 the energy deposits on the power supply box inside the bunker are acceptable. 
# Photon Scraper and new Collimator 5 design by Chandan:  New design for photon scraper to make more clearance in sub-coil 1 2 and 3 regions. The new collimator 5 defines the acceptance precisely and there is ~3mm alignment tolerance. To-do Create new photon and ep-envelopes for engineers with the photon scraper
# Shower-max dose estimates by Dustin: Preparations for Director's review

=bluejeans information=


Meeting ID 635010453


Meeting URL
https://bluejeans.com/635010453



Here are more details about the meeting connection:
-----------------------------------

Connecting directly from a room system?
1) Dial: 199.48.152.152 or bjn.vc
2) Enter Meeting ID: 635 010 453

Just want to dial in on your phone?
1) +1.408.740.7256 (US)
    +1.888.240.2560 (US Toll Free)
    +1.408.317.9253 (Alternate number)

2) Enter Meeting ID: 635 010 453
3) Press #


<br><br> Return to [[Simulation_Meetings | Simulation Meetings]]
<br> Return to [[Simulations | Simulations Main Page ]]
<br> Return to [[Main_Page|Main Page]]