View source for CountingDaq 250213

__NOTOC__
Back to [[Main_Page|Main Page]] >>  [[DAQ Meetings|Data Acquisition Meetings]] >>  [[DAQ Meetings#Counting mode DAQ meetings|Counting mode DAQ meetings]]

[[CountingDaq_250130 | previous meeting]] <<   >> [[CountingDaq_250313 | following meeting]]

== Meeting information ==
  '''Meeting time:'''  11:00am Eastern
  '''Location at JLab:'''  CC F226
  
  Zoom connection information is sent out by email; please reach out to Paul if you don't have the current link.

== Agenda ==
*  Activity updates
*  General discussion

==  Minutes ==
Recording on Zoom:  

Participants:  R. Michaels, R. Conaway, P. King, C. Cuevas, S. Chatterjee, S. Regmi, C. Ghosh, B. Blaikie, P. Souder, A. Sen

*  Status of the W&M test stand
**  Yesterday, there had been a CODA crash after about 2-weeks of running.  Sayak will be sending screenshots to Bryan and Paul
*  FADCv3 testing:  the testing is going well
**  Chris is ready to release the 28 boards that we purchased.  Note that the "Hall D" firmware was used to test the boards.  This version has the FADC send data to the CTP, but not the VTP
**  Chris thinks that the firmware that allows the boards to interface with the VTPs won't be available until after the start of beam operations
**  We could read the FADCv3 over the backplane, using an external trigger
**  Chris thinks that we can have a mixture of v2 and v3 modules in a crate, but Chris would suggest trying to run them in separate crates to start.  But we could discuss it with Bryan
*  Chandan had started upgrading the testlab GEM DAQ for VTP readout, but had gotten busy with the upcoming experiment
*  We may cancel the DAQ meeting on Feb 27, since it either overlaps with or is just after the Director's Review